I+W300- 15TCI
A polyimide film, coated on both sides with the thermally conductive silicone film substrate
| ID Code: | 184158 |
| Gyártó: | SEMIC EU |
| Ár ÁFÁ-val : | 71,2474 € |
| Ár ÁFA nélkül : | 58,8821 € |
| VAT: | 21 % |
| Elérhetőség: | Raktáron |
| Teljes készlet: | 19 m |
| Jelölés a gyártó: | TC-15-TCI-300 |
| Központi raktár Zdice: | 19 m |
| Külső tároló (szállítási idő 5÷10 nap): | 0 m |
| Egység:: | m |
| !_prehled mnozstevnich slev_! | Mennyiség | Ár ÁFA nélkül | Ár ÁFÁ-val |
| 1 + | 58,8821 € | 71,2474 € |
| 3 + | 52,5955 € | 63,6405 € |
| 5 + | 49,7325 € | 60,1764 € |
| 10 + | 45,9694 € | 55,6229 € |
The 15-TCI series is a polyimide film, coated on both sides with the thermally conductive silicone film substrate, is the ideal and user-friendly replacement for mica or ceramic plates in combination with thermal conductivity and very high electrical insulation.
TC-15-TCI has excellent dielectric and mechanical properties. Due to its very soft surface properties, the interface material adapts very well to the contact surfaces and thus minimizes the thermal contact resistance. The thermal conductivity of silicone is increased by the use of highly thermally conductive ceramics such as aluminum oxide, boron nitride and aluminum nitride or by mixtures in the polymer structure of the elastomer.
TC-15-TCI has excellent dielectric and mechanical properties. Due to its very soft surface properties, the interface material adapts very well to the contact surfaces and thus minimizes the thermal contact resistance. The thermal conductivity of silicone is increased by the use of highly thermally conductive ceramics such as aluminum oxide, boron nitride and aluminum nitride or by mixtures in the polymer structure of the elastomer.
Alapinformációk:
| Jelölés a gyártó | TC-15-TCI-300 |
| Eset: | !_i+tape_! |
| Az összetevő típusa: | !_thin strips_! |
| Konfiguráció: | !_plain_! |
| Specifikáció: | !_medium hard_! |
| Anyag típusa: | !_insulating_! |
| Anyag: Burkolat | Kapton |
| RoHS | Igen |
| REACH | Nem |
| NOVINKA | A |
| UL94 | V-0 |
Csomagolás és tömeg:
| Egység: | m |
| Súly: | 122.64 [g] |
| Csomagolás típusa: | ROLL |
| Kis csomag (egységek száma): | 60 |
Elektrofizikai paraméterek:
| Uisol (@25°C/1min/50Hz) | 12500 [V] |
Termikus és mechanikai paraméterek:
| Tmin (legkisebb üzemi hőmérséklet) | -50 [°C] |
| Tmax (legnagyobb üzemi hőmérséklet) | 200 [°C] |
| Thermal conductivity | 1.05 W/m*K |
| Rth Thermal Impedance | 0.63 K-in2/W |
| W - Szélessége | 300 [mm] |
| T - vastagságot | 0.15 [mm] |
| PIN méretek | 0.00 [mm] |
Copyright © www.semic-shop.hu by
Shop5.cz