62EM1-00xxx
SiC Driver in setting for Infineon module, necessary Adapter board in customer-specific settings
| ID Code: | 184442 |
| Gyártó: | AgileSwitch - Microchip Technology |
| Ár ÁFÁ-val : | 401,1906 € |
| Ár ÁFA nélkül : | 331,5624 € |
| VAT: | 21 % |
| Elérhetőség: | kérésre |
| Teljes készlet: | 0 db |
| Jelölés a gyártó: | 62EM1-00xxx Coated |
| Központi raktár Zdice: | 0 db |
| Külső tároló (szállítási idő 5÷10 nap): | 0 db |
| Dodací lhůta dalšího množství: | !_on request_! |
| Egység:: | db |
| !_prehled mnozstevnich slev_! | Mennyiség | Ár ÁFA nélkül | Ár ÁFÁ-val |
| 1 + | 331,5624 € | 401,1906 € |
| 6 + | 318,1332 € | 384,9412 € |
| 12 + | 303,0437 € | 366,6829 € |
| 24 + | 266,8142 € | 322,8452 € |
SiC Driver in setting for Infineon module, necessary Adapter board, Conformal Coating
Driver of SiC modules Semikron, Rohm, Wolfspeed (Cree), Microsemi, and Infineon, each type adjustable by the program.
The AgileSwitch 62EM1-62mm Electrical driver provides monitoring and fault reporting information to enable better control and analysis of SiC MOSFET-based power systems. The 62EM1 provides up to 20 Amps of peak current at an operating frequency up to 200 kHz. 2 X 10W output power. The driver includes isolated HI and LO Side DC/DC converters and provides 7 fault conditions that are reported as a combination of the 3 fault lines via the 20 pin control header. All AgileSwitch drivers use automotive temperature grade components and allow for modifying settings of gate resistors.
Driver of SiC modules Semikron, Rohm, Wolfspeed (Cree), Microsemi, and Infineon, each type adjustable by the program.
The AgileSwitch 62EM1-62mm Electrical driver provides monitoring and fault reporting information to enable better control and analysis of SiC MOSFET-based power systems. The 62EM1 provides up to 20 Amps of peak current at an operating frequency up to 200 kHz. 2 X 10W output power. The driver includes isolated HI and LO Side DC/DC converters and provides 7 fault conditions that are reported as a combination of the 3 fault lines via the 20 pin control header. All AgileSwitch drivers use automotive temperature grade components and allow for modifying settings of gate resistors.
Alapinformációk:
| Jelölés a gyártó | 62EM1-00xxx Coated |
| Dodací lhůta dalšího množství | !_on request_! |
| Type of casing: | MODUL |
| Kategorie | SiC |
| Az összetevő típusa: | !_driver sic_! |
| Konfiguráció: | !_low+high side_! |
| Specifikáció: | !_2-channels_! |
| Az áramkörök száma (A ház) | 2 ks |
| RoHS | Igen |
| REACH | Nem |
| NOVINKA | A |
| RoHS1 | Ano |
Csomagolás és tömeg:
| Egység: | db |
| Súly: | 69.7 [g] |
| Csomagolás típusa: | BOX |
| Kis csomag (egységek száma): | 1 |
Elektrofizikai paraméterek:
| Udc (URRM, UCEO, Umax) | 1700 [V] |
| Udc-sup.min (Min.Supply DC Voltage) | 14 [V] |
| Udc-sup.nom (Nom.Supply DC Voltage) | 15 [V] |
| Udc-sup.max (Max.Supply DC Voltage) | 16 [V] |
| Uisol (@25°C/1min/50Hz) | 4500 [V] |
| UDC-OUT (off/min) | 17 [V] |
| UDC-OUT (on/max) | 21 [V] |
| IOUT puls (Log.1=ON) (TA=25°C) | 20 [A] |
| IOUT puls (Log.0=OFF) (TA=25°C) | 15 [A] |
| du/dt (critical rate of rise of on-state voltage) | 100000 [V/µs] |
| Pd-bez chladiče (Ta=25÷75°C) | 10 [W] |
| Input Logic Level (Ugs level) | 15V |
| Ft (transition/operation frequency) (@Inom.) | 0.125 [MHz] |
Termikus és mechanikai paraméterek:
| Tmin (legkisebb üzemi hőmérséklet) | -40 [°C] |
| Tmax (legnagyobb üzemi hőmérséklet) | 105 [°C] |
| PIN méretek | 0.00 [mm] |
Copyright © www.semic-shop.hu by
Shop5.cz